Thoughts on S60

reflections on the most popular mobile operating system worldwide

Posts Tagged ‘i8910hd

Just so we’re clear…

with 4 comments

YES, it works on AT&T 3G in the US. Read this.

Written by Jonathan

August 31, 2009 at 2:45 pm

Getting the most out of your i8910HD: Manufacturer Codes

with 14 comments

*#0228#

As I mentioned in my review of the Samsung i8910HD, there are several manufacturer codes that can be used to tweak performance of all sorts of different features. While the phone is very capable out of the box, it’s a real advantage to be able to access these hidden settings to tune your device exactly to your liking. In this brief, I’ll go some of the major tweaks, how to perform the tweaks yourself, and how to not damage your phone in the process.

This list is my compilation of information found on the Samsung i8910 Omnia forums and all credit goes to Briggs and the members. If you’d like to read about more device codes to experiment with,  please feel free to give them a visit and say thanks if you do.

Before you attempt any of the codes found in this guide, I want to warn that it is not clear what implications this may have on your warranty. While this guide is safe to make minor improvements to the i8910HD, I take no liability for any damage you do to your phone if you experiment outside the parameters of this guide, nor if your warranty becomes void from performing any of these changes. You are making alterations to your device at your own risk. It is also recommended you write down the previous values for any settings you change in the event you want to change them back to default.

Read the rest of this entry »

Samsung i8910HD Review: THE device of 2009?

with 23 comments

The road to getting myself settled with a Samsung i8910HD has certainly been a long one. After going through 2 defective 8gb i8910HD’s and getting a 16gb that works properly, about a dozen headaches trying to get the firmware software installed and running properly on my PC, and going through almost all of the different available firmwares for the phone, I’ve finally gotten myself comfortable enough to write a proper review. Hopefully I’ll be able to highlight some features of the i8910HD that haven’t been featured in any of the other reviews that have already been published and shed some light on how the i8910HD performs for those who can’t handle one themselves so easily.

I purchased two defective 8gb i8910HD’s from CellsWholesale (pending a full refund) and I purchased the 16gb i8910HD used in this review from Mobile City Online for $725 total ($699+25 overnight shipping, now backordered).

Thanks to all who attended the live Q+A on Qik! If you missed it (and have a couple hours to kill), you can watch the full video here.

Read the rest of this entry »

There is NO 1GHz i8910HD, Updated

with 3 comments

Update: If some research and a dab of common sense weren’t enough, Samsung India has taken down the 1GHz line from the product description and replaced it with the proper specifications listed below.

Recently, a lot of mobile blogs and forums have worked themselves into a tizzy over Samsung India posting the specs of the 16gb i8910HD with an added line that reads “1GHz CPU Powering Innovative 3D UI” and jumping to the conclusion that Samsung put in a newer, faster processor for this release. For those that bothered to look into the actual CPU hardware used in the Samsung i8910HD, you might have noticed this line:

OMAP3430 – 600 MHz ARM Cortex A8 + PowerVR SGX 530 GPU + 430MHz C64x+ DSP + ISP (Image Signal Processor)

Paying attention to the bolded numbers, neither of them come close to 1GHz. It’s only when you add the clockspeeds of the main CPU and the DSP that you get 1030MHz, or 1GHz. That’s all well and good, but NO other mobile CPU is clocked in the same manner. If they were, then that means the N97 is running at 694MHz, the N95 is clocked at 552MHz, and the Palm Pre is clocked over 1GHz.

It also means that EVERY i8910HD on the market has a 1GHz CPU as well.

TechRadar’s post regarding the same topic digs a bit deeper and reminds of Samsung’s previous history with errors on their own website. I’m reminded of Nokia copying and pasting information from the Euro device specifications onto the NAM device pages without bothering to change even the frequencies.

Still don’t believe me? Consider the contrary. Pretending Samsung DID change the processor  it would be a production miracle if Samsung was able to…

A-1. place an order for X,000 (or more) new Qualcomm chipsets (including all of the licensing and purchasing details from TI), OR
A-2. rush their own 1GHz Hummingbird CPU into production a few weeks after it was announced,
B. re-write the drivers necessary for the hardware and operating system to work properly with the new chipset,
C. re-manufacture the next batch of i8910HD’s with this new chipset, and
D. do it all within the 2-3 months the original has been available.

There is NO 1GHz i8910HD. Or, if you like, ALL i8910HD’s are 1GHz. You decide. Either way,

it’s the same device.

Written by Jonathan

August 16, 2009 at 4:19 pm